Before first use or after a long period of inactivity, the timer’s internal memory backup battery must be charged. Charge Time : Plug the timer into a standard wall outlet for 12–14 hours : After charging, use a pin or paper clip to press the "R" (Reset) button to clear any old data. Setting Current Time & Day Enter Mode : Press and hold the button for 3 seconds. Adjust Values + and - buttons to adjust the hour, minute, and day. to lock in each setting and move to the next. Programming On/Off Cycles The EW-32 supports up to 10–20 different programs. Access Programming : Press the once to enter program mode (displaying "P1"). Select Program to choose a program number (e.g., P1, P2). Set "ON" Time , then use
keys simultaneously toggles DST, moving the clock one hour forward or back. Random Security Mode
Repeat for any additional programs (P2, P3, etc.) as needed. 3. Operating Modes ON/AUTO/OFF button to cycle through the three primary states:
Note: Ensure the timer is in the correct state (ON or OFF) relative to your current schedule before switching to AUTO. chevron digital timer ew-32 pdf
Connected bulb wattage is too low, or you are using an incompatible non-dimmable LED.
When activated (often by pressing a dedicated RND button or a combination), the timer will delay your programmed times by a random interval (typically 0–32 minutes), making the home look occupied.
The random feature varies your scheduled times by 10 to 30 minutes. This creates a realistic "lived-in" look to deter intruders while you are away. Before first use or after a long period
: Press to set the current hour (ensure AM/PM is correct). MIN : Press to set the current minute. Release the CLOCK button to lock in the time. 2. Setting Programmed Events
Press and hold the button throughout this entire process.
While holding , press the MIN (or MINUTE ) button to set the correct minutes. Adjust Values + and - buttons to adjust
Press the button again. You will see "1 OFF" on the display.
Internal rechargeable NiMH battery (non-replaceable)
While holding , press the WEEK (or DAY ) button repeatedly until the correct day of the week appears at the top of the screen (e.g., MO, TU, WE).