Digi Sm500 Scale User Manual Exclusive |link| -

Standard Ethernet (TCP/IP), RS-232 serial port, and cash drawer RJ11 interface. Component Location Diagram

Connects to legacy POS systems or external barcode scanners.

Close the print head assembly firmly until it clicks into place.

The is a high-performance system scale designed for retail environments, offering fast processing and a thermal printing speed of up to 150mm/s . This guide serves as an exclusive overview of its core functions, programming, and maintenance. 1. Key Features & Specifications digi sm500 scale user manual exclusive

Remove the empty cardboard core from the take-up rewind spool.

Turn the scale on while holding down the [Rezero] key, or press the [Mode] key until the display reads S1.1 or SET . Maintenance/Z-Mode Used for daily or monthly sales clearing and memory resets.

| Error | Solution | |-------|-----------| | PAPER OUT | Reload label roll, clean sensor | | HEAD OPEN | Close printer cover fully | | NO FORMAT | Missing label format – call service | Standard Ethernet (TCP/IP), RS-232 serial port, and cash

| Error Code | Meaning | Exclusive Fix | | :--- | :--- | :--- | | | Overload – Item exceeds max capacity (typically 500g or 5000g model dependent). | Remove weight immediately to avoid sensor damage. Long-term fix: Do not exceed 105% of max. | | LO | Low battery. | Replace batteries. Exclusive: If using AC adapter, LO indicates a dying power supply – replace adapter, not batteries. | | UnSt | Unstable environment – vibration, air flow, or thermal shock. | Move scale away from fans, open windows, or heavy machinery. Wait 30 seconds. | | C Err | Calibration error – weight was removed too early or wrong mass. | Restart calibration. Ensure weight is exactly as requested. | | Err 2 | ADC failure – Analog-to-digital converter fault. | This often resolves by removing batteries + AC for 10 minutes (hard reset). If persists, return for service. | | 0.0 but weight present | Dead zone or sensor stuck. | Tap the pan lightly 5-6 times. Use a can of compressed air to blow under the pan edges. |

Stainless steel, removable surface with built-in spill protection.

A standout feature exclusive to the SM-500 series documentation is the section on . The is a high-performance system scale designed for

: Standard interfaces include Ethernet 10/100 Base T , RS-232C, and PS2 Keyboard support, with options for Wireless LAN (IEEE 802.11b/g) and RS-485. Operational Features

Press the Save or Enter key to store the PLU in the scale's memory. 4. Maintenance and Calibration

The DIGI SM-500 stores the last 500 transactions in memory (if enabled). To retrieve sales data, connect via RS-232 to a PC using DIGI's proprietary software (sold separately). Do not attempt to open the calibration switch unless you are a certified technician – doing so voids legal-for-trade certification.