Disco 240 Dmx Controller Manual -

: Physical sliders used to alter DMX values (0–255).

Press the BLACKOUT button to instantly shut off all lighting output. Troubleshooting & Setup Tips

A "Scene" is a single lighting look, and a "Chase" is a sequence of scenes. #How to Manual Programming Shrppy Light On DMX 240

: Press the Scanner buttons (P1–P12) to select which light(s) you want to control. disco 240 dmx controller manual

The Disco 240 is a lighting control console designed for managing DMX512-compatible stage lights. It is specifically built to control up to 12 intelligent lights (such as moving heads or scanners) and 24 channels of dimmers (such as PAR cans or LED bars). The "240" in its name refers to the total number of DMX channels available on the board.

Once you’ve saved multiple scenes, you can play them back automatically: Auto Mode: button so the Auto LED lights up.

Remember to check your Page Select status. If you are trying to adjust a setting mapped to channel 10, your physical fader 2 will change nothing unless the page indicator light is toggled to Page B. : Physical sliders used to alter DMX values (0–255)

Adjust the to control how long each scene stays on screen before advancing.

The Disco 240 assigns exactly 20 DMX channels to each of its 12 fixture buttons. To make your physical lights respond to the correct scanner button, you must set the start address on the lighting fixture itself using its digital menu or DIP switches. Scanner Button Starting DMX Address Channel Range Scanner 2 Scanner 3 Scanner 4 Scanner 5 81 – 100 Scanner 6 101 – 120 Scanner 7 121 – 140 Scanner 8 141 – 160 Scanner 9 161 – 180 Scanner 10 181 – 200 Scanner 11 201 – 220 Scanner 12 221 – 240

: 12 buttons to select which lights you are controlling. #How to Manual Programming Shrppy Light On DMX

Connect a 3-pin DMX cable from the port on the back of the Disco 240 to the DMX IN port of the first fixture.

For troubleshooting specific fixture compatibility or more advanced chases, the DMX512 protocol is universal—the principles of addressing and signal management applied here will serve you for your entire lighting career.

Now that the hardware is set up, let us program a simple chase.