Manual Updated — Gordak 952 User

: Before first use, you must release the pump securing screws located at the bottom of the machine. Failure to do so can cause serious mechanical damage.

Flip the unit over and completely remove the transport screws using a screwdriver before plugging it in.

Always tin the soldering tip with a small amount of fresh solder before placing it back into the stand. This prevents oxidation. Safety Precautions

). Do not touch the tip or nozzle while in use, and never point it toward people. gordak 952 user manual updated

The soldering iron handles traditional through-hole soldering, wire tinning, and manual SMD joint touching. Flip the soldering iron switch to "ON."

Controls the mains power to the hot air circuit.

Turn the air flow knob to set the desired air volume. : Before first use, you must release the

The air pump provides a stable, low-noise airflow, perfect for precise, delicate components.

Select the appropriate air nozzle for your IC and secure it onto the hot air gun, tightening the small screw securely.

Mount the hot air gun holder onto the side of the main chassis using the provided screws. Always tin the soldering tip with a small

The Gordak 952 is engineered to facilitate independent usage without interference between its two primary functions: a hot air rework gun and a standard soldering iron. The "Updated Manual" referenced here consolidates the latest technical insights, safety protocols, and practical use cases based on recent user feedback and engineering data.

Clean the tip using brass wire mesh or a tip tinner compound. Increase temperature. Blown fuse or faulty wall outlet.