Hanmatek Dos1102 Manual < DIRECT >

Controls the vertical scale. Turning it clockwise zooms in on the voltage (fewer volts per grid square); counter-clockwise zooms out.

This comprehensive guide serves as an expanded manual to help you set up, calibrate, and master your Hanmatek DOS1102. Technical Specifications Overview

Connect the probe tip to the 5V/1KHz "Probe Comp" terminal on the front panel and the ground clip to the ground terminal.

If the device behaves erratically or gives skewed readings over time: Disconnect all probes from the inputs. Press the menu button. Select Self-Cal (Self-Calibration). hanmatek dos1102 manual

Opens the advanced trigger settings (Edge, Video, Pulse, Slope, etc.). 4. Step-by-Step Initial Calibration (Probe Compensation)

Unlike the "S" variant (DOS1102S), the standard DOS1102 does not include a waveform generator.

Set the cursor type to (horizontal lines) or Time (vertical lines). Use the multi-purpose knob to move Cursor 1 and Cursor 2. The screen will automatically display the difference ( ) between the two positions. 💾 Saving Data and Firmware Updates Exporting Screenshots Insert a FAT32-formatted USB drive into the front USB port. Press the Save/Recall button. Controls the vertical scale

The DOS1102 can connect to a PC. The package includes a CD for the software and drivers. If your PC doesn't have an optical drive, you can download the latest versions from the official Hanmatek website. In the manual center, you'll find a "Download Software and Drivers" link alongside the PDF manual.

Operational Overview and User Manual Summary Model: Hantek DSO1102B (100MHz, 2 Channels) Date: October 26, 2023

Let the routine run to completion without touching the unit. Technical Specifications Overview Connect the probe tip to

The manual dedicates a significant portion to the physical interface. The DOS1102 uses a traditional horizontal layout that differs from some modern portable scopes.

The Hanmatek DOS1102 features a USB Host port on the front for flash drives and a USB Device port on the back for PC connections. Saving to a USB Flash Drive

Your trigger level is not set correctly. Turn the Trigger Level knob until the horizontal trigger line intersects the middle of your displayed waveform.