Hpe Smart Array S100i Sr Gen10 Sw Raid Driver For Windows Server 2022 ((new)) Jun 2026
Choose a destination folder. Ensure files like hpssa3g7.inf , hpssa3g7.sys , and hpssa3g7.cat are visible in the directory structure.
Prevents potential "Blue Screen of Death" (BSOD) or data corruption issues. 3. Download the Driver (Latest Version)
Using software RAID introduces specific operational considerations. Adhering to the following guidelines will ensure high availability and minimize data loss risks. 1. Install HPE Smart Storage Administrator (SSA) CLI / GUI
When performing a clean installation of Windows Server 2022, the setup wizard will reach a stage where it prompts you to choose a hard drive destination. If your array does not appear, follow these steps to load the storage driver manually: Choose a destination folder
ssacli.exe ctrl all show status
Ensure your ProLiant Gen10 server is attached to a reliably maintained Uninterruptible Power Supply (UPS) and dual redundant power supplies if drive write caching is active.
The wizard will read the directory and display the matching compatible driver profile: . Click Next to inject the files. Step-by-Step: Downloading the Driver
The HPE Smart Array S100i SR Gen10 is an embedded software RAID controller (SW RAID) built into the chipset of HPE ProLiant Gen10 servers. It is designed specifically for SATA drives (hard drives and SSDs) and provides foundational RAID capabilities, including RAID 0, 1, 5, and 10.
Create your desired array (e.g., a RAID 1 mirror for the OS volume). Ensure the logical drive is set as the primary boot volume. Step-by-Step: Downloading the Driver
, including download links, installation steps, and best practices. 1. What is the HPE Smart Array S100i SR Gen10 SW RAID The HPE Smart Array S100i SR Gen10 including download links
Once loaded, your configured logical RAID volumes will appear. Select the target partition and continue the installation normally.
To ensure full compatibility and stability, obtain the correct driver package directly from HPE's support portal.
Navigate to > BIOS/Platform Configuration (RBSU) > Storage Options > SATA Controller Options .
to install the OS. This tool automatically injects the necessary drivers, requiring no manual action. Hewlett Packard Enterprise Usage Limitations Mode Requirement : The controller must be set to