Once the data is loaded, navigate to the channel configuration section. Here you can change: Transmit Frequency (MHz)
Once you have finished editing, click the button (or go to Radio -> Write ). The software will upload the new settings to the radio. The radio may restart automatically. Troubleshooting Common Issues
Once the data loads, you will see a tree menu on the left side of the screen.
Wait for the progress bar to finish. Step 2: Edit Frequencies and Settings
has two side buttons below the Push-To-Talk (PTT) button. Using the software, you can assign them functions like: Start/stop scanning channels. Monitor: To check if a channel is in use. High/Low Power: Toggle power output. 5. Writing to the Radio After making changes, you must save them to the radio.
Click the "Write" or "Write Device" button (often an icon with an arrow pointing toward the radio).
The Mag One A8 features up to 16 channels. You can modify several key parameters for each channel inside the software grid: Frequency Configuration
Before you begin, you need the correct tools to establish a connection between your computer and the radio.
: A specialized CPS Programming Cable is required. It typically connects via the radio's programming port (often shared with the audio connector) and hooks into a computer’s USB port.
The A8 has only a few programmable buttons (Side button 1, Side button 2, PTT). CPS allows assigning functions like:
You cannot program the A8 without the correct physical connection.
