Msds — Nalco 77352

: Causes skin burns and may trigger allergic skin reactions (sensitization).

Isothiazolin-3-one biocidal agents (such as 2-Methyl-3(2H)-isothiazolone) blended with Magnesium Nitrate stabilizing carriers.

allow the product to enter drains, surface water, or ground water.

According to the NALCO 77352 Safety Data Sheet , strict protocols must be followed: nalco 77352 msds

Closed-loop cooling systems (safe for use as it does not contain copper stabilizers).

: Harmful if inhaled; may cause allergic respiratory reactions.

This is one of the most critical sections for floor operators and safety managers. It outlines the potential physical and health risks associated with the chemical. : Causes skin burns and may trigger allergic

Nalco 77352 is typically water-based or non-flammable in its liquid state. Suitable extinguishing media include dry chemical, carbon dioxide ( CO2cap C cap O sub 2 ), water spray, or alcohol-resistant foam.

Note: In terms of long-term toxicity, none of the individual substances contained in the blend are registered as carcinogens by agencies like IARC, NTP, or ACGIH. 🛡️ Mandatory Exposure Controls & PPE

A primary benefit is its ability to function effectively at the higher pH levels commonly found in cooling water. Unlike some biocides that degrade in alkaline conditions, it remains potent, providing consistent control. According to the NALCO 77352 Safety Data Sheet

Nalco 77352 is classified as .

from Lenntech for specific application benefits and dosage recommendations in cooling water systems. Consult the Scribd SDS document

Wear protective overalls or suitable chemical-resistant clothing. Ventilation:

The required dosage of Nalco 77352 depends on water chemistry and site-specific parameters. Your Nalco representative will recommend the optimum dosage necessary to ensure maximum program performance according to your specific system conditions. The product is typically fed via a closed system, defined as a system in which fluid is moved from a closed storage vessel into treated media without exposure to the atmosphere except through normal venting or pressure relief devices.