Nitocote Pe135 Msds !!hot!! -

: Wear fitted chemical safety goggles to shield against splashes during mixing and roller application.

: Immediately flush eyes with plenty of clean water for at least 15 minutes, holding eyelids open. Seek prompt medical treatment if irritation persists.

Because the product is free from many common hazardous materials, its toxicological profile is expected to be favorable. Nevertheless, as with all industrial chemicals, inhalation of vapor or contact with skin/eyes should be avoided. The official SDS will provide complete and authoritative information.

: While non-hazardous in standard use, concentrated vapors should be avoided. Some individuals may be sensitive to resins, leading to potential skin irritation or allergic reactions. Section 4 & 6: First Aid & Accidental Release Skin Contact nitocote pe135 msds

: The active hydrophobic polyester emulsion may cause mild skin sensitization or allergic reactions upon prolonged or repeated exposure in sensitive individuals. Derived No Effect Levels (DNEL) for Workers

Wear standard industrial overalls and safety boots to minimize skin contact. 9. Physical and Chemical Properties State: Liquid / Paste Color: Gray Odor: Typical low-odor bitumen scent Boiling Point: ~100°C (Water content) Density: ~1.15 to 1.22 g/cm³ at 25°C

Nitocote PE135 should be stored in a well-ventilated area, away from heat sources and ignition sources. Dispose of the product and its containers in accordance with local regulations and guidelines. : Wear fitted chemical safety goggles to shield

Low toxicity. Swallowing large amounts may cause gastrointestinal discomfort, nausea, or vomiting. 3. First Aid Measures

is a single-component, high-performance protective coating based on hydrophobic polyester resin. Designed by Fosroc , it serves as an eco-friendly barrier for concrete substrates, offering exceptional resistance to chemical exposure and abrasion.

: Present in minor, regulated trace concentrations. Because the product is free from many common

Wash spill site with water. Do not allow material to enter drains or watercourses. 5. Handling and Storage

To minimize risks when handling Nitocote PE135, follow these safety precautions:

Prevent the material from entering drains, surface water, waterways, or soil systems.