Niton - Xlt 898 User Manual

). When conducting high-temperature PMI, operators must minimize direct contact intervals to short 5-to-10 second intervals to prevent heat transferring into the Si-PINSi-PIN

Clean the casing with a damp cloth. Never submerge the unit.

Depending on your software package configuration, you can toggle between several modes:

Simon looked at the rusty pipe. It was curved. He had been holding the gun an inch away from the surface, afraid to scratch the nose cone. Niton Xlt 898 User Manual

: Low power 35kV/1.0W X-ray tube with a Silver (Ag) node target.

Slide the rechargeable battery pack into the handle until it clicks. Only use Thermo Scientific certified chargers to avoid damaging the lithium-ion cells.

Any displaying on your screen

| Part | Action | Frequency | |------|--------|------------| | (Prolene film) | Wipe with isopropyl alcohol and lint-free cloth | Daily or when dirty | | Detector | Do not touch; internal only | Never (service only) | | Battery contacts | Clean with pencil eraser | Monthly | | Exterior | Damp cloth (mild soap) | Weekly | | Window replacement | Unscrew nose cone, replace film | As needed (tears/punctures) |

Clean the check sample, check for software updates, and ensure the window is not damaged.

Wear a personal radiation dosimeter badge during your shift. Depending on your software package configuration, you can

A: This is a common error code. The manual typically suggests checking the window for blockage, ensuring the sample is flush against the nose, or checking the battery voltage.

Treat the analyzer like a firearm. Never point the front window at yourself or anyone else, regardless of whether a test is active. : Low power 35kV/1

You must perform a System Check at the start of every shift, or if the ambient temperature shifts significantly.

features a screen-driven menu. Key sections detailed in the manual include: