If you plan to collect logs, attach a second hard drive before starting the virtual machine for the first time.
Adding the disk after the initial initialization process without manual mounting.
Once the VM boots up, connect to its text console to configure the initial network parameters. Connect via virsh: virsh console Panorama-10.0.4 Use code with caution. panorama-kvm-10.0.4.qcow2
Before deploying the QCOW2 image, ensure your KVM host has sufficient resources. Allocating inadequate resources will cause boot failures or severe performance degradation.
Ensure outbound TCP port 443 is open from the Panorama management IP to the internet, and verify your primary DNS server configuration. To help refine your setup, tell me: If you plan to collect logs, attach a
Using the stock panorama-kvm-10.0.4.qcow2 is easy, but optimization is critical for production.
virt-install \ --name=Panorama-10.0.4 \ --ram=32768 \ --vcpus=8 \ --os-variant=rhel8.0 \ --disk path=/var/lib/libvirt/images/panorama-kvm-10.0.4.qcow2,format=qcow2,bus=virtio \ --network bridge=br0,model=virtio \ --graphics none \ --console pty,target_type=serial \ --import \ --noautoconsole Use code with caution. Key Parameters Explained Connect via virsh: virsh console Panorama-10
The base operating system requires a minimum 81 GB virtual disk.