WiFi Commander for Pentax is a Microsoft Windows app to remote control your wireless enabled RICOH / Pentax camera.
The app has exciting features as Live View HD with Zoom&Pan, AutoFocus at click, pictures download in two sizes, AutoDownload, Planned Shots, Bulb mode and Dark Frame subtraction support, Histogram, Intervalometer,
Tablet mode and much more...
Added support to AstroTracer Type 3. Try it with our Planned Shots function!
You can remotely set Av, Tv, ISO, Exposure Compensation values. Based on you camera support there are also Exposure Mode, White Balance, Image Size and much more!
With or without Live View enabled you can easily take a picture, review in different sizes and download it.
Live View is available also in HD resolution!
Select you storage slot and browse your pictures. You can review images in preview or full size, download the best, download by selection or download them all!
Use the << button or use the ALT + Enter shortcut to switch to the Tablet mode. This way top menu and side panel will leave space to Live View or to better review pictures.
You can choose to disable autofocus at all or, in Live View, you can use your mouse to click where you want the focus to be. Also if the Live View Zoom enabled you can pan through the image using you mouse, merely click in the direction that you want.
Very useful for bracketing, focus stacking, interval shots and many more photographic stuff.
Define the scheduled shots with different settings, also focus points, and let the app do the job! Set the auto download feature to start working on the images before the end of the series.
Easily put your mouse pointer over a functionality and a tooltip will explain to you what the app can do.
You can also see the tutorials on my Youtube Channel!
Do you still want help?
Who needs a guide?
| Problem | Likely Cause (from manual) | Solution | | :--- | :--- | :--- | | Device won’t turn on | Battery deeply discharged | Charge for 6 hours, then reset (hold power 10 sec) | | erratic cover readings | Probe not calibrated | Perform Air Calibration | | No rebar sound | Wrong probe frequency (1.5 vs 2.5 MHz) | Switch probe or use auto-sense mode | | Corrosion map all red | Wet concrete surface | Dry surface, wait 24 hours | | USB not recognized | Drive not FAT32 | Reformat drive on PC |
: The modern successors integrate with iPads via Bluetooth for high-resolution 3D visualizations and cloud reporting.
remains a legendary workhorse in the world of Non-Destructive Testing (NDT) . Known for its precision in rebar detection and cover measurement, it’s the tool engineers reach for when they need reliability without the fluff.
The Proceq Profometer 4 is a state-of-the-art, non-destructive testing device used to measure the thickness of concrete cover and detect rebar locations in a wide range of construction and civil engineering applications. As a leading device in its class, it's essential to understand its features, operating procedures, and best practices to maximize its potential. This article provides an in-depth look at the Proceq Profometer 4 manual, offering insights and guidelines to help users get the most out of their device. proceq profometer 4 manual
Best for tight spaces, corners, and areas with highly congested reinforcement.
Place a spacer of known thickness (e.g., 20 mm) between the probe and the concrete surface.
The analog or digital display interface that shows cover depth and signal strength. | Problem | Likely Cause (from manual) |
Move the probe slowly in a straight line perpendicular to the expected direction of the rebars.
If bars are close together, the signals may interfere, causing inaccurate, high-cover readings. The best measurement is achieved when the probe is far from neighboring bars.
: Emits a variable acoustic signal that increases in pitch as the probe nears a rebar. Manual Calibration Best for tight spaces, corners, and areas with
The Profometer 4 is a specialized tool for two primary measurements, both detailed thoroughly in the manual:
Input correction variables if scanning through surface overlays or non-standard concrete aggregates.
Offers higher spatial resolution for tightly spaced reinforcement bars. Connecting Cable: Links the probe to the control unit.
: Mark the locations of several parallel bars, then repeat the process at a 90° angle to build a complete representation of the rebar grid. Modern Alternatives & Resources
Use this form to ask to me more info about this app and future projects. I would like to expand its compatibility, move from Windows forms to UWA, build a mobile app ... I need your support then!
Use this form if you would like to see your idea implemented.
I will try to check if it's possible and if I have a way to do it.
Use this form if the tooltips are not enough to undestand what WiFi Commander for Pentax can do... but also to report a bug!
Hi there! I made this app to avoid to remove my SD cards when I want to download pictures and to remotely take my still life shots with my Pentax K-1.
I hope you enjoy my efforts!