Qidi Xplus Firmware Install

Insert your USB drive into your PC. Right-click the drive, select Format , set the file system to FAT32 , and click format.

Follow the specific documentation of the Klipper flavor you chose, which often involves flashing the SD card on the motherboard directly, rather than just the USB on the screen.

The update is typically performed using a USB drive formatted to . How to download firmware for Xplus3 3D printer? - Facebook qidi xplus firmware install

Remove the EMMC module from the printer's mainboard (requires opening the back panel).

Before you start the firmware installation process, make sure you have: Insert your USB drive into your PC

What are you currently trying to solve with this update? Share public link

Once you master the official , you might wonder, "Can I install Klipper?" The answer is yes. Due to the X-Plus using an MKS Robin Nano board, you can flash Klipper firmware to it. However, this voids your warranty and removes the touch screen functionality (you must use Mainsail or Fluidd via a Raspberry Pi). For 99% of users, the official QIDI Marlin firmware is the safest bet. The update is typically performed using a USB

Insert the USB into the printer turned off, then power it on.

Use this method if your printer isn't on a network or if the online update fails. 1. Prepare the USB Drive Use a high-quality USB stick (preferably formatted to Download the latest firmware package (often a file) from the QIDI Tech support page

🛠️ Method 1: Updating the Original QIDI X-Plus (Chitu-Based)