When this happens, the printer effectively locks itself to prevent ink overflow, requiring a "resetter" to clear its internal memory and get back to work. The Secret Handshake: Service Mode
This means your Service Tool version is incompatible with the Canon E510 architecture.
Locate the section inside the program window. resetter canon e510
If the waste ink counter is reset to zero without replacing or cleaning the physical ink absorber pads, the printer "thinks" the pads are new. However, the pads remain saturated.
: Once in Service Mode, press the Stop/Reset button 4 times , then press Power once to confirm. Turn the printer off and back on to complete the reset. When this happens, the printer effectively locks itself
| Error Message | Solution | | --- | --- | | “Printer not found in service mode” | You exited Service Mode too early. Repeat the button sequence. Ensure the green light stays on solid. | | “Timeout / Communication error” | Change USB port. Use USB 2.0, not USB 3.0. Try a different cable. | | “EEPROM Write Fail” | You are using the wrong service tool version. Download v3400 specifically for the E510, not v2000. | | Resetter crashes on launch | Run as Administrator (Right-click > Run as Admin). Disable antivirus. | | Flashing lights continue after reset | The pad overflow sensor is physically triggered. Open the printer and dry the pad area with a hairdryer (cool setting). |
If you cannot enter service mode or the tool gives errors, try these steps: Try a different version of the Service Tool. If the waste ink counter is reset to
Canon printers feature physical sponge pads inside the base. These pads collect wasted ink during printhead cleaning cycles. Why the Printer Locks Up
The Canon PIXMA E510 often requires a reset when it encounters the or 5B02 error codes, which signal that the waste ink absorber is full. Resetting involves entering a specialized Service Mode and using a software resetter tool to clear the internal counter. Phase 1: Entering Service Mode
Canon does not sell an official resetter to consumers. They want you to bring the printer to an authorized service center, where they charge a fee often equal to the price of a new printer. This is where third-party software comes in.