Press the green button if you need to lock the reading to read it away from the machine line. 4. Understanding LCD Display Indicators
Provides an alert to signify active measurement or when specific thresholds are met. Technical Specifications Measurement Distance 25 mm ($\pm$0.5 mm) guided by LED lights Measurement Range
: Ground the meter by connecting the provided ground lead to the grounding terminal on the conductive resin case to ensure accurate readings.
The target surface area is smaller than the sensor's field of view. Ensure the target surface is at least for accurate results.
Because Simco (now part of ITW) updates their documentation, you should always download the official PDF rather than relying on a scanned copy from 2010. simco fmx002 manual full
Freezes the current measurement on screen.
Note: Zeroing won't work if the reading is already high (>50V) or if "HOLD" is active . 2. Taking a Measurement
Ensure bare skin contact with the case or attach the ground snap. Low battery voltage or internal firmware lock. Replace the 9V battery and retry. Constant non-zero reading in open air The sensor plate is contaminated with dust or residue.
Press once to turn ON (a single beep sounds). Press and hold for more than 1 second to turn OFF. ZERO Button: Calibrates the device to zero volts. HOLD Button: Retains the current measurement on screen. 4. Operating Instructions Press the green button if you need to
To freeze a reading, press the HOLD button. This is useful when measuring hard-to-reach areas. Press it again to return to live measurement. 2.2 Using the Memory Mode can store data for later review.
The manual lists common problems and solutions:
Simco FMX-002 is a portable electrostatic fieldmeter used to locate and measure static charges up to $\pm$19.99 kV . While the FMX-002 has been largely superseded by the
Slide open the battery compartment cover on the back of the device. Connect a fresh 9V battery to the snap terminals. Technical Specifications Measurement Distance 25 mm ($\pm$0
For those who haven't yet absorbed the manual, here is a concise breakdown. The SIMCO FMX-002 is a handheld electrostatic field meter used to measure the surface voltage of an object without making physical contact.
Clean the conductive plastic case with a soft cloth dampened with water or a mild antistatic cleaner.
Integrated LED lights ensure the user is holding the meter at the exact 1-inch distance required for accurate measurement [1].