Xinje Plc Usb Driver Install ((free))

1. Driver Installation Fails on Windows 10/11 (Digital Signature Error)

Windows will locate the .inf file and complete the installation. Step 5: Verify the Connection

Connect the PLC to your PC using the appropriate USB programming cable. Windows will attempt to recognize the device.

If the driver fails to install or the PLC won't connect, try these solutions:

Power on your Xinje PLC using the correct power supply (24VDC or 220VAC depending on the model). xinje plc usb driver install

What (if any) do you see in the software or Device Manager? Share public link

Look for a new category called or Universal Serial Bus controllers .

Plug the other end of the cable into a USB port on your computer.

Typical path for XDPro : C:\Program Files (x86)\Xinje\XDPro\Driver Windows will attempt to recognize the device

: A standard USB-to-Serial cable or a direct USB-B/USB-C cable, depending on your specific Xinje PLC model.

: This indicates a driver mismatch or signature block. Re-run the installation after disabling driver signature enforcement.

. Windows will install the driver. You may see a security warning; select "Install this driver software anyway" ✅ Step 4: Verify the Connection Once installed, the device should appear under Ports (COM & LPT) as "USB Serial Port (COMx)" or under Universal Serial Bus controllers Communication Settings

For XGCP Pro, the path is typically: C:\Program Files (x86)\Xinje\XGCPPro\Driver or C:\Program Files\Xinje\XGCPPro\USB_Driver . Share public link Look for a new category

The Xinje USB driver is not available as a standalone download from the official website. Instead, it's bundled within the . Therefore, you must download the complete XDPPro software suite.

and select the matching COM port to establish a successful connection. Further Exploration

This is the most common driver for direct USB connections.

Install your respective Xinje programming software (e.g., ).